Brocott UK

Ideal for electric motor windings, transformer coils, tesla coils, solonoid coils and almost any coil winding application that requires insulating, bonding & sealing. This varnish can also be used as an anti-tracking coat on printed circuit boards and components. Can be applied to windings using a small paint brush or components can be dipped.

General Description…

A reliable & convenient air-drying varnish designed for the electrical industry. Anti-tracking varnish provides a tough, impervious, insulating seal in difficult environments. The system dries rapidly in thin film to give very effective sealing off of electrical leakage paths together with excellent noise reduction characteristics. The cured product conforms to BS 5629 type 1.1 (IEC 464), has excellent resistance to transformer oils and moisture, and is suitable for use in Class B and F insulating systems. A low hazard fungicide is included in the varnished enamels, which gives a 0 rating (no growth) fungal resistance when tested to BS 3900 PTG6.

Specifications…

Drying Time:   Touch Dry In 15 Minutes,  Hard Dry In 60 Minutes,  Full Cure In 24 Hour

Method:  Brush, Dip or Spray

Breakdown Voltage:  (20°C) 1200v/ml